1999-06 GM SILVERADO V8 2WD 5" LIFT KIT

The Maxtrac Suspension 5-inch lift for the GM full size trucks is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. We then replace the factory coil spring with a lifted coil spring and Maxtrac twin-tube shocks to complete the front lift. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The rear lift comes with Maxtrac twin-tube shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.

NOTES:

• 17" Wheel or Larger w/ 4 5/8" Backspacing or less
• Track width Increase .5" Per Side
• Will Clear 33" tires

Front components:

PN: 700930 3" Lift Spindles -

PN: 750920-8 2" FRONT LIFT COILS (V8) -

PN: 1650SL Front MaxTrac Shocks

Rear Components:

PN: 3" BLOCKS & U-BOLTS, FRONT/REAR MAXTRAC SHOCKS

MAXTRAC SUSPENSION DOES NOT ADVISE USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES