2001-09 FORD RANGER 2WD 5" LIFT KIT 2WD TORSION MODEL
Lift Kit-Suspension w/Shock
Description
The Maxtrac Suspension 5-inch lift kit for the Ford Ranger is a cost-effective way to lift your 2WD truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. We then install a Maxtrac lift torsion key that can prove an additional 1-3 inches. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The rear lift comes with Maxtrac twin-tube shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.
This kit comes with:
P/N: 703030C LIFT SPINDLES EDGE / SPORT (TORSION) 01-09
P/N: 843013 LIFTED TORSION KEYS
P/N: 810030 FABRICATED LIFT BLOCKS
P/N: 910203L U-BOLTS FOR 1-3" LIFT BLOCKS (10 3/4" X 2 7/8")
P/N: 2100SL FRONT MAXTRAC SHOCKS (1-3" LIFT)
P/N: 2650LL-9 REAR MAXTRAC SHOCKS
NOTES:
- ***** THIS KIT FITS 2001-2009 2WD TORSION BAR MODELS ONLY! WE OFFER 4" & 6" KITS FOR THE COIL SPRING MODELS AS WELL. PLEASE SEE OTHER KITS OR CALL FOR MORE INFO *****
- MAXTRAC SUSPENSION DOES NOT ADVISE USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
Product Series
Details
Shipping Information
- Item Requires Shipping
California Residents: Prop 65 Warning
WARNING: Cancer and Reproductive Harm
Visit: www.p65warnings.ca.gov