2009-18 RAM 1500 2WD 5.7 HEMI 7" LIFT KIT W/ FOX SHOCKS

The Maxtrac Suspension 7-inch lift for the Ram 1500 is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. We then install a Maxtrac coil spacer on top of the factory coil spring along with a Fox 2.0 monotube shocks to complete the front lift. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The spindles come with extended, DOT compliant, stainless steel braided brake lines. The rear lift comes with Fox 2.0 monotube shocks, rear coils, track bar/swaybar brackets. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.

NOTES:

• Track width increase of 1" per side
• 17" Wheel or larger w/ 4 1/2 - 5 3/4 " Backspacing
• Wheel width 8-9.5 
• Will Clear up to a 37" x 12.50 tires
• P/N: 612400 required for vehicles with 2-piece

This kit comes with:

P/N: 702145 4.5" LIFT SPINDLES W/ EXTENDED BRAKE LINES DOT COMPLIANT

P/N: 872171F 2.5" FRONT COILS & FRONT FOX SHOCKS

P/N: 902445F 3" COILS, 1.5" SPACERS, TRACK/SWAY BRKTS, FOX SHOCKS

WARNING:

MAXTRAC SUSPENSION DOES NOT ADVISE USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES