We utilize our patented design spindles as the cornerstone of our lift systems. The combination of spindles and spacers or springs, provide superior ground clearance on our 2WD lift kits. Maxtrac suspension is your Leader in 2WD Spindle Lift Technology, and is now manufacturing 4WD lift kits, utilizing our proven techniques for giving YOU cutting-edge kits that work with all current factory suspension technologies. Most of Maxtrac's systems are 100% Bolt-On installation, requiring little to no modification to the vehicle. From 2WD with spindles to 4WD crossmember kits, Maxtrac has the best kit that will lift your truck safely, without breaking the bank!

Components

Aluminum Arms Aluminum Arms
Block & U-Bolts Block & U-Bolts
Carrier Bearings Carrier Bearings
Coils Coils
Lift Components Lift Components
Shackles Shackles
Shocks & Struts Shocks & Struts
Spindles Spindles

Available For

Chevrolet Chevrolet
GMC GMC
Ram Ram
Ford Ford
Jeep Jeep
Nissan Nissan
Totyota Totyota

Installation Instructions

If you’re looking for Installation Instructions Maxtrac has got you covered. From detailed manuals you can download to instructional videos from some of the best around, we’ll have you installing like a pro in no time.

More Info »

More Info »

More Info »

More Info »

More Info »

More Info »

More Info »

Frequently Asked Questions

Maxtac has been providing quality products for quite some time, so you can bet we have the knowledge and experience to answer any question you can throw at us. Listed below are answers to some of the most common questions we get. Do you have a technical question too detailed to tackle here? No problem. Reach out to us and one of our Maxtrac experts will be happy to help.

FAQ’s for

  1. I just installed one of your kits and cannot get my truck into proper alignment specs, what should I do?
  2. I would like to get a price quote for one of your products
  3. What are your alignment specs?
  4. Will my stock wheels work with the product/kit I want?
  5. Will my truck sit level after installing a Maxtrac Suspension lift kit?
  6. Will your lift spindles fit my 4wd vehicle?

Q: I just installed one of your kits and cannot get my truck into proper alignment specs, what should I do?

Please contact Max Trac tech support at (844) 535-1668 M-F 8am-5pm pacific time.

Q: I would like to get a price quote for one of your products

Unfortunately, we do not sell retail to the public. Please use our dealer locator page to find either a local dealer or check out our list of online retailers.

Q: What are your alignment specs?

Alignment specs are always recommended to be as close to factory as possible.

Q: Will my stock wheels work with the product/kit I want?

This will vary per application. Please look under the specifications section of the product in question for wheel & tire specs.

Q: Will my truck sit level after installing a Maxtrac Suspension lift kit?

Most of our lift kits are designed to get your truck sitting as close to level as possible once installed. The amount of rake each truck has from the factory varies though and some trucks may need more or less lift front and rear to sit level. We recommend measuring your vehicle’s stock rake angle to know exactly how much lift will be necessary for a level stance.

Q: Will your lift spindles fit my 4wd vehicle?

No. A 4wd truck with IFS (independent front suspension) has front axles that attach to the differential at one end and run through the wheel bearing on the spindle at the other end. Our 3”, 3.5”, 4”, 4.5” or 5” lift spindles achieve their height by relocating the wheel bearings down the body of the spindle. After the wheel bearing is relocated down on the spindle, it now sits directly in front of the lower control arm. If these spindles were put onto a 4wd truck, the front axle would now be running directly through the middle of the lower control arm making it physically impossible to install.